Techforum Journal

Volume 2021 (3)

  • Research article

Patient-Specific Optimization of Customized Corneal Cross-Linking Using Regional Stress–Strain Index Deficit Maps: A Computational Biomechanics Study

John Michael Owen1
1Emeritus Professor of Aerospace Engineering / Department of Mechanical Engineering, University of Bath
  • Published Date: 30/12/2021
  • Research article

Multi-Objective Co-Design of Cell-to-Pack Battery Electric Vehicle Systems for Range, Cost, and Lifetime

Assyr Abdulle1, Bernard Louis Koff2
1Professor of Mathematics, EPFL; Mathematics Section, École Polytechnique Fédérale de Lausanne
2Emeritus University Professor of Mathematical Sciences, Kent State University; adjunct professor at Case Western Reserve University
  • Published Date: 30/12/2021
  • Research article

A Unified Differentiable Framework for Simultaneous Topology, Packing, and Routing Optimization of Compact Electro–Thermal Modules

Phillip Harris Paul1
1Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94550
  • Published Date: 30/12/2021
  • Research article

Closed-Loop Self-Sensing Multilayer Microhydraulic Actuators for Dexterous Microrobotic Grippers: Design, Modeling, and Numerical Validation

Hyman Norman Abramson1, Phillip Harris Paul2
1Retired Executive Vice President Southwest Research Institute
2Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94550
  • Published Date: 30/12/2021
  • Research article

Multi-Objective Health-Aware Energy Management of a PEMFC/Battery/Supercapacitor Hybrid Emergency Power System for More-Electric Aircraft

Professor Necip Sahinkaya1
1Kingston University, London, UK
  • Published Date: 30/12/2021
  • Research article

Sector-Coupled Decarbonisation of High-Temperature Industrial Heat in Kazakhstan: A Thermodynamic and Techno-Economic Model for Steel, Cement, and Chemical Manufacturing

Paul Steen1
1Professor in the Smith School of Chemical and Biomolecular Engineering at Cornell
  • Published Date: 30/12/2021
  • Research article

Shape-Based Functional Principal Component Monitoring of Low-Sampling-Rate CNC Machining Processes

Stephen Howard Davis1, Frank M. White1
1Walter P. Murphy Professor Emeritus of Engineering Sciences and Applied Mathematics, Northwestern University
  • Published Date: 30/12/2011